Machine dimensions
Compare the stated machine envelope with your access opening. Working and transport dimensions describe different arrangements; keep them separate when planning loading.
Skid Steer Loaders / MODEL
FYHY382T
Compare FYHY382T operating load, bucket working geometry and fluid capacities. Operating load and maximum lifting value are separate references; length with the pedal folded is identified independently.
Images are representative. Final configuration may vary by specification.
Operating Load300 kg
Bucket capacity0.15 m³
Total width1,025 mm
Dimensions & weight
| Total width | 1,025 mm |
|---|---|
| Total height | 1415 mm |
| Ground clearance | 125 mm |
| Length without bucket | 1685 mm |
| Bucket width | 1150 mm |
| Length with bucket | 2340 mm |
| Length without bucket, pedal folded | 1685 mm |
Loading & working range
| Operating Load | 300 kg |
|---|---|
| Bucket capacity | 0.15 m³ |
| Maximum working height | 2,105 mm |
| Maximum dumping height | 1,390 mm |
| Maximum pin height | 1865 mm |
| Maximum dumping distance | 600 mm |
| Maximum dumping angle | 40 ° |
| Maximum lifting value | 380 kg |
Maximum lifting value is a separate stated rating, not a rated operating load or a safe working capacity. Confirm the measurement conditions and permitted operation for the selected machine.
Power
| Rated Power | 16.5 kW @ 3600 rpm |
|---|
Hydraulics
| Hydraulic system pressure | 0–16 MPa |
|---|
Hydraulic system references do not establish auxiliary-circuit performance. Confirm the attachment circuit, required flow and pressure before choosing powered equipment.
Travel & capacities
| Travel speed | 0–4.5 km/h |
|---|---|
| Fuel tank capacity | 20 L |
| Engine oil capacity | 1.7 L |
| Hydraulic tank capacity | 35 L |
Reading these specifications
Load definitions
Operating or rated load is listed under its stated definition. Tipping load, lifting force and the machine’s own mass are different quantities.
Engine & power
Engine identity and power ratings belong to the configuration stated in the table. Where alternatives are listed, read each engine and rating together; they are not one combined standard package.
Travel & control
Travel speed describes machine movement, not engine output.
Specify your configuration
Confirm machine weight, engine identity and the required pedal arrangement. Request hydraulic flow with its time unit and circuit identification before choosing a powered attachment.
Configuration checklistCONTINUE COMPARING
Related models.
LET’S START WITH THE DETAILS
Discuss FYHY382T for your requirement.
Include the model or series, quantity, destination and configuration you need.