Machine dimensions
Compare the stated machine envelope with your access opening. Working and transport dimensions describe different arrangements; keep them separate when planning loading.
Skid Steer Loaders / MODEL
FYS530
The FYS530 table brings together operating load, machine weight, working height and its listed engine rating. Use the model-specific measurements when comparing access and loading requirements.
Images are representative. Final configuration may vary by specification.
Operating Load450 kg
Bucket capacity0.2 m³
Total width1,050 mm
Dimensions & weight
| Operating Weight | 1,330 kg |
|---|---|
| Total width | 1,050 mm |
| Length with bucket | 2,745 mm |
Loading & working range
| Operating Load | 450 kg |
|---|---|
| Bucket capacity | 0.2 m³ |
| Maximum dumping height | 1,535 mm |
| Maximum lifting value | 530 kg |
| Maximum working height | 2630 mm |
Maximum lifting value is a separate stated rating, not a rated operating load or a safe working capacity. Confirm the measurement conditions and permitted operation for the selected machine.
Power
| Engine | Kubota D1105 |
|---|---|
| Rated engine power | 14 kW |
Travel & capacities
| Travel speed | 0–4.5 km/h |
|---|
Reading these specifications
Load definitions
Operating or rated load is listed under its stated definition. Tipping load, lifting force and the machine’s own mass are different quantities.
Engine & power
Engine identity and power ratings belong to the configuration stated in the table. Where alternatives are listed, read each engine and rating together; they are not one combined standard package.
Travel & control
Travel speed describes machine movement, not engine output.
Specify your configuration
Keep FYS530 and FYS530T selections separate when requesting a quotation. Confirm their configuration relationship, bucket and attachment requirements instead of assuming interchangeability.
Configuration checklistCONTINUE COMPARING
Related models.
LET’S START WITH THE DETAILS
Discuss FYS530 for your requirement.
Include the model or series, quantity, destination and configuration you need.